The hull is more than 5 meters long, the maximum width is 224 cm. A high side and excellent seaworthiness are present. But that is far from all. Have you gathered for a picnic with your family in beautiful sunny weather? Spacious lounge and spacious rear sofa can accommodate up to 5 people. The high awning will hide from the rain, and the unsurpassed seaworthiness of the boat will allow you to safely return from the trip in case the weather nevertheless deteriorates.
Are you a fisherman? Here is a magnificent boat with two aerators and huge fish platforms — front and rear, which are transformed from the sofa in one motion. You can put your own spinning rods (up to 2.7 m long) into existing lockers. Go ahead for the fish!
Pay attention to the basic equipment of our boat. Aerator, adjustable seats, wiper, gangway and more. And, of course, foam, full coloring of the case, tempered glass. Other manufacturers will not be able to make such a favorable price offer for this boat. Choose your Alum and discover a new world of pleasures!
Case manufacturing type | all-welded |
Case type | open |
The length of the body is the largest | 5.1 m |
Overall length of the vessel | 5.48 m. |
The width of the hull is greatest | 2.25 m. |
Overall breadth of the vessel | 2.25 m. |
Sideboard midship | 0.99 m. |
Draft with hull maximum | 0.36 m. |
Kilovost of the hull on the transom | 16 degrees. |
The mass of the equipped case | 635 kg. |
Allowed number of people on board | 5 people |
Transom height | 0.51 m. |
Max allowable engine power | 115 hp |
Fuel tank capacity | 110 l. |
Case material AMG-5M | |
The thickness of the skin of the bottom and sides | 3.0-4.0 mm. |
Volume of buoyancy blocks | 0.98 cubic meters |
All-welded aluminum body (AMG5M) | |
Heavy Duty Power Pack (Aluma-Pro) | |
Hull painting with Hempel ship paint (Denmark) | |
The foamy blocks of unsinkability with rigid-porous Basf polyurethane (Germany) | |
Tempered glass in an aluminum frame 2 crinolines (30 cm) | |
ABS plastic consoles with compartment in the passenger console | |
Covering the deck with marine premium vinyl (Italy) | |
Finishing the interior space with a marine carpet (Italy) | |
2 additional bases for a rack of a seat | |
Built-in switch panel - 5 pcs. | |
110 liter stationary fuel tank | |
Accessories (hinges) from AISI 316 stainless steel | |
Fuel level sensor | |
Stainless steel fuel tank hole | |
Steering system (steering wheel, gearbox, cable) | |
Electrical wiring under 36 volts | |
2 sockets 12 Volts (bow, control post) | |
Mass switch | |
Electric pump for pumping water | |
Automatic bilge pump switch | |
Navigation lights (navigation, parking) | |
Folding mooring ducks 4 pieces of stainless steel | |
Dry lockers in the bow - 2 pcs. | |
Lockers for spinning rods - 2 pcs (max. Length 2700 mm, max. Length 2450 mm) | |
Lockers in the aft - 2 pcs. (232 liters) | |
Aerator | |
Comfort chairs | |
Two racks with swivel mechanisms and sliders (driver and passenger seat) | |
Large glove box with a lid in the passenger console | |
2 cup holders in control posts | |
Illumination of the bow deck | |
Cockpit lighting | |
Wiper on the driver's side | |
Telescopic gangway for crinoline | |
USB socket on the passenger console | |
Fuel filter separator | |
The glove compartment in the passenger console | |
A convertible sofa into a fish platform | |
Soft overlays for a sofa |