Case manufacturing type |
all-welded |
Case type |
open |
The length of the hull is the largest |
4.84 m. |
Overall length of the vessel |
5.16 m. |
The width of the hull is the largest |
1.93 m. |
Overall breadth of the vessel |
1.93 m. |
Midship-side |
0.88 m. |
Kilovost of the hull on the transom |
14 degrees. |
Draft with hull maximum |
0.28 m. |
The mass of the equipped case |
370 kg. |
Payload |
450 kg. |
Allowed number of people on board |
5 people |
Transom height |
0.51 m. |
Max allowable engine power |
70 hp |
Fuel tank capacity |
55 l. |
Case material |
AMG-5M |
The thickness of the skin of the bottom and sides |
3.0 mm. |
Volume of buoyancy blocks |
0.75 cubic meters |
All-welded aluminum body (AMG5M) |
|
Heavy Duty Power Pack (Aluma-Pro) |
|
Hull painting with Hempel ship paint (Denmark) |
|
The foamy blocks of unsinkability with rigid-porous Basf polyurethane (Germany) |
|
Tempered glass in an aluminum frame 2 crinolines (30 cm) |
|
ABS plastic consoles with compartment in the passenger console |
|
Corrugated aluminum deck 2 removable chairs with a stand |
|
Sofa with soft seats made of sea leather |
|
Integrated switch panel - 3 pcs. |
|
55 liter stationary fuel tank |
|
Fuel filler hole |
|
Hardware (hinges) |
|
Steering system (steering wheel, gearbox, cable) |
|
Electrical wiring under 36 volts |
|
2 sockets 12 Volts (bow, control post) |
|
Fuel gauge |
|
Electric pump for pumping water |
|
Automatic bilge pump switch |
|
Navigation lights (navigation, parking) |
|
Dry lockers in the bow - 2 pcs. |
|
Lockers in the stern - 2 pcs. |
|
Lockers under the seats of sofas - 1 pc. |
|
Mooring ducks - 4 pcs. |
|
Fuel filter separator |
|