2.24 meters wide gives this boat unrivaled comfort. It is very stable — you can confidently move from side to side by two or even three, the rolls will be minimal!
You may have noticed that when fishing in narrow boats, the legs and back become tired after some time. Forget it on our Aluma fish 4.7XL boat. You may feel as if you are not in a boat, but on a mini-ship, and this is not surprising. Due to the large amount of free space you will have the opportunity to properly stock up with gear, baits and various things!
A huge fish platform will allow you to comfortably fish with it together at the same time. The basic equipment of this boat is already included — tempered glass in an aluminum frame, a double-circuit aerator for 100 l, 2 lockers for spinning 2 each, a slider and a swivel mechanism for seats, a ladder, cup holders and cockpit lights!
We seriously took care of your safety when operating the Aluma fish 4.7XL and made an extra-powerful power pack with a significant margin of safety and a rigid board (due to longitudinal bends) so that you can be sure of your boat in the most unexpected extreme situations!
All this — DIRECTLY FROM THE FACTORY WITHOUT DEALERS at a very competitive price!
Case manufacturing type | all-welded |
Case type | open |
The length of the hull is the largest | 4.76 m. |
Overall length of the vessel | 5.11 m. |
The width of the hull is greatest | 2.25 m. |
Overall breadth of the vessel | 2.25 m. |
Sideboard midship | 0.99 m. |
Draft with hull maximum | 0.34 m. |
Kilovost of the hull on the transom | 16 degrees. |
The mass of the equipped case | 585 kg. |
Payload | 450 kg. |
Allowed number of people on board | 5 people |
Transom height | 0.51 m. |
Max permissible engine power | 100 hp |
Fuel tank capacity | 90 l. |
Case material | AMG-5M |
The thickness of the skin of the bottom and sides | 3.0 mm. |
Volume of buoyancy blocks | 0.88 cubic meters |
All-welded aluminum body (AMG5M) | |
Heavy Duty Power Pack (Aluma-Pro) | |
Hull painting with Hempel ship paint (Denmark) | |
The foamy blocks of unsinkability with rigid-porous Basf polyurethane (Germany) | |
Tempered glass in an aluminum frame 2 crinolines (30 cm) | |
ABS plastic consoles with glove compartment in the passenger console | |
Covering the deck with marine premium vinyl (Italy) | |
Finishing the interior space with a marine carpet (Italy) | |
2 swivel chairs with a stand | |
3 additional bases for a rack of sitting | |
3 folding sofa seats | |
Built-in switch panel - 5 pcs. | |
90 liter stationary fuel tank | |
Stainless steel fuel filler neck | |
Accessories (hinges) from AISI 316 stainless steel | |
Steering system (steering wheel, gearbox, cable) | |
Electrical wiring under 36 volts | |
2 sockets 12 Volts (bow, control post) | |
Mass switch | |
Fuel gauge | |
Electric pump for pumping water | |
Automatic bilge pump switch | |
Navigation lights (navigation, parking) | |
Folding mooring ducks 4 pcs stainless steel | |
Dry lockers in the bow - 2 pcs. | |
Lockers for spinning rods - 2 pcs (max. Length 2700 mm, max. Length 2450 mm) | |
Lockers in the stern - 3 pcs. (232 liters) | |
Anchor locker in the bow - 1 pc. (114 liters) | |
A locker under the seats - 1 pc (100 liters) | |
Two racks with swivel mechanisms and sliders (driver and passenger seat) | |
Comfort chairs | |
Large glove box with a lid in the passenger console | |
2 cup holders in control posts | |
Illumination of the bow deck | |
Cockpit lighting | |
Wiper on the driver's side | |
Telescopic gangway for crinoline | |
USB socket on the passenger console | |
Fuel filter separator |