A width of 2.04 meters allows it to be made much more stable than ordinary boats 4.7 meters in length!
Finishing with premium, wear-resistant materials, stainless steel fittings, tempered glass in an aluminum frame, two lockers for spinning rods, two in each, two-component BASF foam in buoyancy units, a painted board and design control posts made of 5 mm thick ABS plastic are standard equipment! The ability to install an aerator of 80 liters for the most demanding anglers.
Fast, maneuverable, easy to drive, it will give you a lot of positive emotions both from driving and from practicing your favorite hobby! The price of this boat will pleasantly surprise you! And all this thanks to our unique sales model — DIRECTLY FROM THE FACTORY WITHOUT DEALERS.
Case manufacturing type | all-welded |
Case type | open |
The length of the hull is the largest | 4.67 m. |
Overall length of the vessel | 5.02 m. |
The width of the hull is greatest | 2.04 m. |
Overall breadth of the vessel | 2.04 m. |
Midship-side | 0.86 m. |
Maximum draft | 0.3 m. |
Kilovost of the hull on the transom | 15 degrees |
The mass of the equipped case | 450 kg. |
Payload | 450 kg. |
Allowed number of people on board | 5 people |
Transom height | 0.51 m. |
Max allowable engine power | 80 hp |
Fuel tank capacity | 60 l. |
Case material AMG-5M | |
The thickness of the skin of the bottom and sides | 3.0 mm. |
Volume of buoyancy blocks | 0.8 cubic meters |
All-welded aluminum body (AMG5M) | |
Heavy Duty Power Pack (Aluma-Pro) | |
Hull painting with Hempel ship paint (Denmark) | |
The foamy blocks of unsinkability with rigid-porous Basf polyurethane (Germany) | |
Tempered glass in an aluminum frame 2 crinolines (30 cm) | |
ABS plastic consoles with compartment in the passenger console | |
Finishing the interior space with a marine carpet (Italy) | |
Deck decoration with marine vinyl (Italy) | |
2 swivel chairs with a stand | |
2 additional bases for armchairs | |
2 folding seats of a sofa from sea skin | |
Built-in switch panel - 5 pcs. | |
60 liter stationary fuel tank | |
Stainless steel fuel filler hole | |
Accessories (hinges) from stainless steel | |
Steering system (steering wheel, gearbox, cable) | |
Electrical wiring under 36 volts | |
2 sockets 12 Volts (bow, control post) | |
Electric pump for pumping water | |
Fuel gauge | |
Automatic bilge pump switch | |
Navigation lights (navigation, parking) | |
Stainless steel ducks | |
Dry lockers in the bow - 2 pcs. | |
Lockers under the seats of sofas - 2 pcs. | |
Lockers in the stern - 2 pcs. | |
Lockers for spinning rods 2 pcs (max. Length 2700 mm upper, max. Length 2450 mm lower) | |
Locker under the seats - 1 pcs. | |
Fuel filter separator |